Siemens SolidEdge ST6 MP03 Update

Product: Solid Edge
Version: 106.00.03.04
Date: 13-Nov-2013

Note: Maintenance Packs are all inclusive and can be installed on top of the base
release or any released Maintenance Pack.

This Maintenance Pack can be installed on top of Version:
106.00.00.100, 106.00.01.07, or 106.00.02.05


–- Maintenance Pack Policy –

We release Maintenance Packs for CRITICAL items only. Maintenance Packs are available
up to a maximum of 15 months following the release date of the English version. The
release date for Solid Edge ST6 English was 7/19/13, making the Maintenance Pack
cutoff date 10/19/14.

––––––––––
End of Release Notes
––––––––––

–––––––––-
Installation Notes:
–––––––––-

After downloading the Maintenance Pack to your machine, unbundle the zip file and
then dbl click on exe to install the Maintenance Pack.

–––––––––-
End of Installation
–––––––––-

–––––––––––––––––––––––––
This Maintenance Pack addresses the following PRs:
–––––––––––––––––––––––––

===API===

PR 6952126: Replace all on alternate components from automation fails to replace all
PR 2226134: Req. for sample code to Control the mesh & contour display through SE API
PR 6959176: Stack corruption when calling AddSimplifyEnclose with more than one component
PR 2227984: In test case for PR#2171379 fixed in ST4, the error occurs in ST6
PR 6938187: Publish to GrabCAD - error uploading FOA
PR 6938983: Server busy error when saving from the GrabCAD upload dialog
PR 6935212: Added GetMatrix API to Sketch and Profile
PR 6940547: Crash on calling OrderedGeometry API present on Sketch Profile in Part Document
PR 6941052: a crash when calling CopySurfacePtr->GetName() API

===Assembly===

PR 2224165: Defensive fixes for crashes reported by customer
PR 6952137: Replace Part command resulting in incorrect display/locate/highlight while in-place active
PR 6953362: Wireframe shows through in XpresRoute ONLY from frame creation
PR 6958580: some bad property data was causing assemblies to be perpetually out-of-date
PR 1956935: Simplified Assembly Model initializing as ordered rather than synchronous
PR 2225795: SE not allowing changing material of Part if part file is modified outside.
PR 6953840: Update Links is not updating.
PR 6627930: Configuration Manager doesn't work properly after making assy an alt assy
PR 6936068: Solid Edge crashes when highlighting in a section view
PR 1960814: Added compatibility for NX 9.0 and SE ST6

PR 2228413: SolidWorks bulk migration not working

Note:SolidWorks Data Migration users require a separate maintenance pack
to take advantage of features provided by ST 6 MP3. The SolidWorks
Data Migration tool can be downloaded from:

https://download.industrysoftware.automation.siemens.com/solid_edge/ST6/Data_Migration/SolidWorks/


===Draft===

PR 1957933: Selecting callout saved setting after smart select results in crash
PR 6950656: Changing a dimension view Values/Formulas/Names is delayed at ASM level
PR 6948493: Incorrect export of Mechanical Symbols from Draft Callouts
PR 1957529: Etch constructions were not shown in a drawing view with assembly features turned off
PR 6937501: Fill not appearing on OLE cut and paste
PR 6954350: crash when smartmouse hovers over bspline
PR 6957060: Shading does not update correctly in ST6, MP2

===Part/Profile/Sheet Metal===

PR 1956410: Loft Command Extent Options cause Abort in ST6 MP1
PR 6952014: Error creating a 2nd body while IPA; eventually leads to SE crash
PR 6952582: Invalid memory access
PR 1955449: pattern of parts on synchronous holes is wrong
PR 1958269: Paste is very slow
PR 1959828: crash when editing a line
PR 6954491: Mesh dialog is clipped off right side at larger display settings

–-
End
–-