Siemens PLM NX 8.0.1.5 Update Only 32bit & 64bit

Fixed Problem Reports

Selecting RMB–>Workpiece–>Save as - fails to create part
Wire-edm operation loses information when copied
CAD:- cannot edit scale label which was created with German special character
Automatic turning doesn't work; spun from solid fails
PS24.00.168 - CAD:- Face becomes invisible when a chamfer is modified
NX Turning - Unable to Create the 2D Turning Section
Parallel access on data possible
PS24.1.140 fix. Unable to complete a Shell update if a Mirrored Body is used
Incorrect behaviour of Wire EDM operations after insert 'In-path events'
Drawing sheets are duplicated when a file is upgraded from v3 to v4
CAM: PR - Spun Outline Cannot derive outline from solid
CAM: Drill to model depth creates endless toolpath in certain conditions
Extract Curve Issue , cubic vs quintic - quintic spline is undesirable
CAM: PR - Spun_Outline Problem in NX4 with the given Part
An invalid tag was passed to the tag module error when opening an assembly
Contour_Profile gives unrecognized Tool motions in NX5.0.2.2
Unable to Create the Lathe Cross Section
Cannot derive outline from solid
Turning - Spun outline does not create the correct geometry
CAM: PR - Turning - "Cannot derive outline from solid" error in spun outline
Gouges in z-level operation
Spun-Outline returns error "Cannot create wire body from outline curves"
Could not open NX3 Part
Error in MillUser operation -> No MOM MSYS Event while posting
TcVis 2007.1 views 2 .prt files as 2 sheets and not 1 sheet like NX5 does
CSYS associated with a UDF could not be moved to another Layer
Viewing a .prt as 2D in TcVis 2007.1 results in 9 sheets instead of 3
TURNING- Unable to Create a Spun Outline From a Solid Geometry
Unable to Create a Spun Outline From a Solid Geometry
The content of a locked mesh is deleted
Trouble with pro_e transfer
Cannot derive Outline from Solid
VASC- contour profile operation have steps in the path when multi depth is used
Offset(1067) fails update running Playback
NX-6: Unwrap divided conical face, not correct
When a sheet is deleted in NX the No of sheets in TCE CGM viewer does not update
Cannot run ugmanager_transfer_program, ".prt not found" error
CAM: PR - Spun-Outline Problem (Cannot derive outline from solid)
CAM: PR - Spun-Outline Problem (Cannot create wire body from outline)
CAM: PR - Spun-Outline Problem (Cannot derive outline from solid)
CAM: PR - Spun-Outline Problem (Cannot derive outline from solid)
Turning geometry creation error
CAM: PR -Cannot derive outline from solid comes up after using "Turning Part"
Cannot edit scale label which was created with German special character
CAM: PR - Spun Outline produces Gaps from length about 0.01- 0.02 mm
Getting "Cannot derive outline from solid'
Unable to Create a Spun Outline from a Solid Body
Could not create solid section from Solid Works jt
Cloning assembly is deleting IPE rather than linking to the new cloned comp name
Variable position Mating Conditions fail to convert to NX6 assembly constraints
Cannot derive spun outline from solid part
CAD:- after loading facets of an assembly the display is littered with boundaries
Incorrect Turning Workpiece
Turning a mirrored component gives error "Cannot derive outline from solid"
CAM: PR - UDE's not shown in syncmanager-window
CAD : Edit -> Move objects does not support WCS orientation

……….and more. Complete list of fixes in archive